How to Quickly Measure for Your New Toilet Seat
Take dimensions for a new toilet seat before replacing or changing an existing one. Even though it could seem like a waste of time, accurate measurements are vital to guarantee that the toilet seat fits correctly. This post will guide you through the steps to quickly measure your new toilet seat.
How to Measure for a New Toilet Seat?
It’s essential to comprehend the need for exact measures before learning to take measurements for a new toilet seat. It could be uncomfortable or hazardous if the toilet seat does not fit correctly. The bowl will only be covered partially if the toilet seat is too small, leading to a filthy bowl. Injuries are more likely if the huge seat doesn’t fit snugly into the bowl.
If you take the time to measure correctly, you can avoid these problems and provide visitors with a calmer, safer, and cleaner toilet experience. Any measurement requires time.
Step 1: Determine the Item’s Width.
First, the width of the toilet bowl must be determined. Find the widest area of the bowl, which will be located in the center of the bowl. This is where the seat ensures full coverage of the bowl.
At the widest point of the bowl, measure the distance between the two bolt holes. To measure the width, open the toilet seat and find the widest part of the bowl. Place the end of the tape measure on the outer edge of the bowl, where it meets the base of the toilet. Stretch the measuring tape across the middle of the bowl to the outer edge. Note this measurement for your records.
It is crucial to measure the area accurately because even the slightest inaccuracy can prevent the seat from fitting.
Step 2: Measure the Length.
The length of the bowl should then be determined by starting in the middle of the hinge post holes and working your way forward. The size of the toilet seat will be determined using this measurement.
Place one end of the measuring tape in the middle of the hinge post hole, then extend the other end until it touches the seat bolts at the front of the bowl. Note down this measurement for your records. Since the seat will be attached to the front of the bowl at this point, you must also measure up to this point.
Step 3: Measure the Bolt Spread.
The distance between the two holes in the toilet bowl that support the hinge post is known as the bolt spread. This is required so that the holes in your toilet bowl can accommodate the bolts on your new seat.
Placing one end of a measuring tape in the center of one of the hinge posts and extending it to the center of the other hole is one way to determine the bolt spread. Note down this measurement for your records. Verify your measurements to be sure the seat won’t fit improperly due to an improper bolt spread.
Step 4: Check the Shape.
There are round and elongated seats available. The shape of the bowl will select the best toilet seat for your toilet. The diameter of a typical round bowl is around 16.5 inches. A standard elongated bowl has a diameter of about 18.5 inches. Measure the length of your toilet bowl to establish its shape, as instructed in the second step.
Using the instructions from Step 2, measure the length of the bowl from the center of the hinge post holes to the front of the bowl. What kind of toilet bowl you have is described on this page. The bowl fits in an area of around 16.5 inches since it is spherical. The diameter of an extended bowl must be at least 18.5 inches. Selecting the proper form when buying a new seat is crucial; otherwise, the seat won’t work effectively.
Step 5: Consider Other Factors.
Once you know your toilet bowl’s size, shape, bolt spread, and dimensions, you may look for a new toilet seat. While choosing a new seat, a few more variables must be considered. Think about the following elements:
1. Material:
Various materials, such as plastic, wood, and vinyl with padding, may be used to make toilet seats. Choosing the material that best suits your requirements is essential since each has benefits and drawbacks.
2. Color:
To match or contrast the other elements of your bathroom’s decor, toilet seats come in various colors. Choosing a color that goes well with the rest of the bathroom’s design is crucial.
3. Features:
Some toilet seats contain characteristics that make them easier to clean and more user-friendly, including quick-release buttons or soft-closing springs. Depending on what matters to you the most, choose your seat.
Step 6: Installation
It’s time to swap out the old toilet seat with the new one after you’ve made your pick. Most toilet seats are sent with installation instructions. These guidelines must be strictly observed.
The old seat and any residual hardware must be removed before installing the new one. After that, place the new seat on the toilet bowl, ensuring the bolt holes line up with the ones already there. The seat will be secured by the included nuts but take care not to overtighten them as this might harm the bowl.
Conclusion:-
Even though it may seem tedious, taking measurements for a new toilet seat is essential to ensure your time in the bathroom is as comfortable and secure as possible. Taking precise measurements of your toilet bowl and considering other elements like material and features will help you choose a seat that fits perfectly and meets all your needs. If you have the right tools and follow the instructions, the new seat should be simple to install in a few minutes.
Related Post : When Should You Install a Toilet Seat | How to Install a New Toilet Seat
How Do I Know What Size Toilet Seat I Need?
To determine what size toilet seat you need, you should measure the distance between the centers of the two bolts. Also, measure the length of the bowl from the front of the bowl to the center of the bolt holes. That will help determine the shape of your toilet bowl.
How to Measure for Replacement Toilet Seat?
To measure for a replacement toilet seat, you must first measure the distance between the bolt spread that secures the existing toilet seat to the toilet bowl. Then determine the shape of your toilet bowl by measuring the width and length of the bowl. When choosing a replacement toilet seat make sure the measurements match the size and shape of your toilet bowl.
How to Measure Toilet Seat Length?
To measure the length of the toilet seat, place one end of the measuring tape in the center of the hinge post hole, then extend the other end until it touches the seat bolt at the front of the bowl. Note this measurement for your records. Since the seat is attached to the front of the bowl at this point, you must also measure up to this point.
How Do I Know What Shape My Toilet Seat Is?
Measure the length of the toilet bowl from the front edge to the center of the bolt holes. If the measurement is approximately 16.5 inches, you have a round bowl. If the measurement is approximately 18.5 inches, you have an elongated bowl.
If You Liked This Post? So Share It with Your Friends
Suggested Articles:
