Only Hot Water Coming Out of Shower
One of the best things in the world is stepping into a shower at the end of a long, challenging day. It could be challenging to unwind if the water’s temperature continually changes and never reaches your preferred level. We’ll discuss the causes of only hot water coming out of the shower today and possible fixes.
Why Is Only Hot Water Coming Out of Shower?
When you turn on the shower, all you get is hot water. There might be several reasons for this. Here, we’ll quickly review the most common frequent reasons for this issue.
Pressure Balancing Valves Issues
The primary function of a pressure-balancing valve is to prevent sudden changes in water temperature caused by variations in water pressure. It accomplishes this by balancing the flow of hot and cold water to maintain a stable mix, regardless of changes in the pressure of either water supply.
Your pressure-balancing valve could be faulty for starters. It can result from corrosion, mineral buildup, a broken cartridge, or a damaged valve. If this valve goes bad your shower can suddenly stop supplying cold water, and constantly only hot water coming out of your shower. Replacing the faulty valve can solve this problem.
Water Heater Issues
If your shower is connected to a hot water heater, there may be a problem with the heater that is affecting the cold water supply. For example, if the heater is malfunctioning, it may not be sending cold water to the shower. Check the water heater for any visible issues or consult a professional to assess and address the problem.
Plumbing Issues
Cold water can be difficult to obtain. A shower may not produce cold water if the pipe that delivers it is blocked. Clogged pipes, broken valves, or water mains can cause this problem.
However, you should be aware that this rarely happens and is more likely to happen when there is construction adjacent or there is a problem with the local or municipal water supply.
If the problem is with the cold-water supply in the residence, there will be hot water only. On the other hand, a blockage in the cold-water line for a shower is very unusual because debris can enter the pipe. If the cold-water line is blocked, the entire house will be without cold water.
Damage Shower Valve
In some cases, the problem may be the shower valve itself. If the shower valve is broken or clogged, the hot and cold water may not mix properly, resulting in a hot shower.
Internal shower valves components, such as the cartridge or mixer, can become damaged, worn, or blocked, preventing cold water from flowing properly. In such cases, you may need to replace the faulty valve or its components. Consider contacting a plumber or manufacturer for assistance.
How Do You Fix This Issue?
Now that we’ve reviewed potential issues with your shower and why it may not generate cold water, let’s discuss how to fix it. Let’s go through what you must do to fix your shower so you may use cold water.
Change the Cartridge.
A broken pressure-balancing valve is the most frequent reason cold water doesn’t flow from the showerhead. To remedy the problem, the valve may need to be changed. The shower cartridge, which is the component within the valve, should be changed as soon as possible.
You should see a local plumber if you cannot replace a shower cartridge because you need essential knowledge. However, you may change a shower cartridge if you are handy and want to save money. Only the parts that follow will touch on this tactic. You can purchase a Shower cartridge from the nearest hardware store.
Check the Water Control Valve
In the meantime, a water stop switch can be an alternative solution. Make sure the water control valves on your shower are fully open. If your valve holes are slightly narrowed, your shower may not be able to deliver cold water.
Unlike water lines leading to built-in showers and tubs, shutoff valves are less commonly found on water lines connecting sinks and toilets. Make sure the hot and cold stop controls are open before showering, even if you can’t reach them. If you follow these instructions your shower should be fine.
How to Replace Shower Cartridge?
As previously mentioned, a broken pressure-balancing valve is the most typical reason a shower does not produce cold water. A damaged pressure balance valve might result in abnormally hot or cold-water delivery. Change the shower cartridge, and the problem can be permanently fixed.
You’ll need a Phillips head and a flat-head screwdriver for the first step. They are easily accessible at any hardware shop, and if you need them immediately, you can even get a two-pack that includes one of each variety.
- First, shut off the shower’s water supply valve.
- Then, cover the shower drain with a cloth or towel to stop anything from falling in. The sewage system won’t be able to accept water.
- The shower handle and protective coatings should be removed using the appropriate tools. Before gently detaching the handle from the stem, secure it in position.
- Now you can see how your shower is put together. To help you remember where each piece goes, take a picture of the components that must be combined.
- After dismantling your tap and cleaning the inside parts, you may reassemble it. This will remove anything that has developed on your shower’s parts.
- Use the needle-nose pliers to remove the retainer chip then.
- Use the cartridge tool you bought to replace the shower cartridge once you’ve removed it.
- Before assembling everything again, replace the shower cartridge and grease the moving parts. Use what you learned from the previous information to assist you in getting through this one.
- Once again, using this strategy is challenging. If you don’t know anything about plumbing, you should hire an expert to do the job.
Conclusion:-
We have provided the best methods to fix if only hot water coming out of the shower. We hope this helps you a lot. Cold water is essential to life, but getting in and out of the shower cannot be easy if the temperature changes. To ensure that you have cold water, install a pressure-balancing valve in your shower to control the pressure and temperature of the released hot and cold water. If the pipe delivers only hot water, it may be due to a clogged pipe, a broken valve, or an issue with the water main.
Why Is There No Cold Water in My Shower?
There can be many reasons why your shower is not getting cold water, including pressure balancing valve issues, closed or partially closed shut-off valve, and water heater issues.
Where Is the Shower Valve Located?
Some shower or bathtub shutoff valves are installed on the shower wall, on the surface of the tub, and near the showerhead. In some cases, the shower valve may be installed inside the wall rather than on the surface. The valve handle or trim plate is visible, while the actual valve body is hidden inside the wall.
Where Is the Pressure Balancing Valve Located?
The pressure balancing valve is usually located near the shower or tub area, typically behind a wall or inside a wall cavity. It is usually installed during the initial plumbing installation or during a bathroom renovation.
Where Is the Shower Cartridge Located?
The shower cartridge is usually located inside the shower valve body. It is a critical component that controls the water flow and temperature in the shower. It is important to note that the exact location of the shower cartridge may vary depending on the type and design of the shower valve.